Factory direct Wolf hot cartoon girl personality creative classic lighter lighters
This is a creative personality Wolf-windproof lighter with audible, I also liked Wolf in that role, like friend contact me!
1, and using Shi, as products containing gas of reduced and around environment temperature of changes, flame height will has must degree of changes, this is normal phenomenon, you can moderate to on flame height for adjustment; 2, and using Shi, normal of flame height should regulation in: windproof and the straight class lighter for 1.5-2.5 cm; langsheng, and gasoline and the fire class lighter for 2.5-4.0 cm; 3, and if needs on flame height for regulation Shi, Please use slotted screwdriver to align the slots of the flame adjuster; lighters per se with adjusting ring can be adjusted with your fingers (-) arrow direction is clockwise, adjustable flame height (+) arrow direction is counterclockwise to increase flame height. Note: counterclockwise rotation, not proper flame height on the basis of more than half a turn. Otherwise, it may damage this product; 4, petrol lighters flame height control by adjusting the ignition Wick height. Excessive flame height, use scissors to wick a little if the flame height is too low, it may be appropriate to pull out the wick.
Filling methods
1, when aerated, absolutely no Mars or around fire, to ensure safety. Never side smoking side plus gas; 2, and should using qualified of butane gas, inferior gas may damaged lighter or reduced using life; 3, and General models plus gas Shi, please inverted lighter, will gas bottle vent mouth alignment and cover live lighter intake mouth, hard pressure times, each keep 2 seconds around; if gas cannot raises, may is steam box within retained has extra of air, at this time you can for put gas, with small screwdriver alignment intake mouth rapid put gas 1-2 times, again for plus gas operation; 4, langsheng when aerated, please use a tool such as a screwdriver loosen the inlet screw covers, then the above steps. Aerated after the screw covers screw flat, not too tightly; otherwise causes the canopy cover is dense and cover sound not clear, but it will also make the gas escapes. Hardcover type langsheng confidential with dedicated gas mouth tie plus gas; 5, and gasoline engine refueling Shi, should open skull, pulled out and turned movement, opened outer sponge joined moderate gasoline,, gasoline infiltrated within layer cotton Hou, cover Shang outer sponge, again sets into machine shell within; 6, and various lighter added fuel Hou, at least to waiting 1 minutes, makes new filling into of gas temperature adjustment to at room temperature State, and, attached in lighter appearance of residual gas volatile completely zhihou to ignition. If the ignition operation may burn residual gas with lighter appearance, resulting in unnecessary danger. After you replenish gas, occurred when using the flame height is too high or too low, is a normal phenomenon, can moderate the flame height adjustment.
