Packaging information
CTN Szie: 40 × 30 × 20 cm
G.W./CTN:10 kg
QTY/CTN:150 pc/carton
Name: swelling Binder
capacity: 2ML
packing quantity: 1000 packs/box-12000 packs/box
origin: Japan/USA
features: high temperature resistance, can be bonded to a variety of surfaces type: the type of moisture absorption bonding surface: PVC,PU,PC,ABS,PA, etc. Usage: The bonding surface must be cleaned with 50% acetone solution, and the surface must be thoroughly dried with a brush (no fibers must fall off), and the base gel should be evenly coated on the adhesive surface, the coating thickness is 0.05MM, adhesive tape can be pasted only after base gel is dry.
Product Features:
1. The initial stickiness is super strong, reaching the damage level in a very short time.
2. This product is applicable to: rain shield, handle, door handle, car window trim, anti-collision tape, lampshade, fuel tank cover, rear guard plate, middle mesh trim, welcome pedal, EPDM/TPE rubber seal and other car modification parts.
3. Applicable to all kinds of domestic and imported tapes
4. The smell is relatively light and cost-effective.
5, the perfect place 94, 4298, K-520,K-500 swelling Binder
in order to enhance the initial adhesion of double-sided adhesive, a kind of swelling binder coated on the surface of the adhesive before coating. It acts with water molecules in the air and can produce a high temperature resistance of adhesive property, especially when used with acrylic acid foam tape (Acrylic foam tape), which can play an excellent bonding effect.
【Key 【 method of use]]:
1 clean the place to be pasted to ensure that the surface is free of dust, water and oil. It is recommended to wipe it with alcohol or high-strength white wine (or use the detergent produced by our company).
2, tear open the product packaging and take out the liquid non-woven fabric inside
3. Because this product is extremely volatile, it is quickly applied to the parts that need to be pasted with double-sided adhesive after unpacking.
4, when the liquid is slightly dry (about 30 seconds), it can be pasted with double-sided adhesive tape
5. Take out the double-sided adhesive tape and stick it on the liquid part. After sticking it, press the double-sided adhesive tape evenly with a little force.
