Specification of aluminum tube: 30ML.40ML.125ML.
Canned specification: 70 ml, 125 ml, 250 ml, 500 ml, 750 ml850ml, 1 l, 3 l, 4 l. 5 l, 15 l.
Application and application:
This adhesive can be used for boards, plywood, fireproof board, density board, linen board, curved willow board, aluminum-plastic board, etc. It can also be bonded to some steel, aluminum, rubber, plastic, leather, cloth and other materials.This adhesive is widely used in interior decoration, fine art advertisement and automobile interior decoration.
Usage:
Wipe off grease, dirt and other dirt on the bonding surface. If the surface contains mold release agent (the product is coated on the mold during molding, which has anti-adhesion effect), before bonding, apply solvent to wipe off the mold release agent on the surface.
◆ use a brush or scraper to evenly apply glue from inside to outside on the adhesive surface (if large area of glue is applied, it is recommended to apply glue on both adhesive surfaces at the same time). Air dry for 5 ~ 15 minutes under the normal temperature humidity of 70% (the adhesive layer is slightly non-sticky).◆ aim at the adhesive surface once, extrude from inside out (eliminate air bubbles), use rubber hammer or wood hammer to hit the compaction, and the working strength can be reached after 24 hours.
