grease gun is a manual tool to grease the machinery and equipment. It can be fitted with iron spear (iron spear head) or hose (flat head) gas nozzle. Of gas in a convenient location in a spacious place available iron gun (iron spear head), gas hidden location, beating around the Bush must hose (flat gun head) to refuel. This product has the advantages of simple operation, easy to carry, the use of a wide range of advantages, is the majority of agricultural machinery, maintenance center of the necessary tools.
brand: light aircraft
gun capacity: 500CC
blasting pressure: 7000psi
packing quantity: 20PCS
impoted
strengthening material: zinc alloy, alloy steel cover
use: heavy machinery engineering special
single color box price of 17 yuan
node structure
grease gun is composed of a handle, and the gun head barrel handle fuel nozzle can be divided for beak peace mouth two attachment points hose and hard tube the two, inside the barrel is composed by the leather bowl, spring, steel ball, the exhaust bolt and.
classification
A grease gun gas different butter gun , manual grease gun , foot butter gun, electric butter gun and other kinds of.
skills
The main fault
a leather bowl is not good, this is almost a common problem of all domestic oil gun. No wonder, however, put a gun structure with respect to ordinary tools is relatively complex, it sells more than ten dollars, and probably only so;
two is the oil pressure mechanism is not good, but if the spring and the steel ball check no problem it probably cannot be repaired.
three is used in some fault, the faults using a and many of their own operation caused by, you can think of ways to avoid. Such as sand, once mix in butter in a grain of sand, and when you use is pointed the nozzle that you have not the oil gun thrown to Jiehen. And for equipment is absolutely no good. However, all this as a matter of fact, most cases is caused by their own. So be sure to keep the butter clean, can not be used to clean the tool to refuel, put the oil container to be promptly covered.
measures
1, if there is a hard pull rod can pull pole on several occasions, making the air inside and grease mixed, reduce the volume of a single bubble perhaps the problem may be solved, but the effect is not every time are very good.
2, the most effective way is to bleed, but this requires hardware support, some gun body has exhaust port design, when you slowly open the exhaust screw inside the air will come out.
Final level of skill is 3, finally a, and time tested, repeated construction exploits. When you feel there are gas and cannot play simply by turning the gun body and the pump body with the silk export or back and forth a few (preferably side blank holder), guarantee you success. The truth is not difficult, is that when you turn, in fact, the gas inside the bubble is also turning to another part, the original part of the oil filled, so the problem will be solved.
