First, the basic specifications
1, weighing range: 3 ~ 180kg
2, the scale value: 0.1kg
3, display: 4 LED LCD display
4, power: two ordinary 7 batteries
5, boot mode: automatic on the scale switch machine
6, weighing unit: kg / lb / st
7, automatic shutdown: 10 seconds
8, low voltage display: "LO"
9, the error shows: "Err"
10, overweight display: "OL"
Second, the operating instructions
1, weighing, please scale on a hard level, in order to avoid the impact of weighing accuracy, please do not put the scale on the carpet soft ground.
2, open the scale behind the battery cover, the switch to the required unit "kg" or "lb", switch the middle "OFF" to cut off the power supply.
3, automatic weighing on the scale function, simple operation, easy to use, no switch machine operation.
4, the product shows a stable weight value of about 10 seconds after the automatic shutdown.
5, the product after the first weighing may not be accurate weighing, please wait for automatic shutdown after weighing again.
6, when the boot display "LO" means that the power is inefficient, should replace the electronic.
7, when the weighing display "Err" means that the weighing error, should start again.
8, when the weighing display "OL" means that the product has been overloaded.
9, the product uses high-precision fifth-generation sensor, high precision long life
Third, the use and maintenance recommendations
1, please note that the glass bearing surface to keep dry, to prevent slipping fall.
2, please keep static during weighing.
3, do not beat, hit and drop the product.
4, this product is precision instruments, please be careful.
5, to prevent water into the scale body, and placed in a dry place.
6, please level the product, please do not stand.
7, if you can not boot, please check whether the electronic installation, or power is sufficient.
8, if the product appears to be weighed wrong or can not turn off for a long time, please remove the battery after 5 seconds to re-installed.
