Creative Bentley Car Key Pendant Windproof Rechargeable Inflatable Metal Lighter Personality Fashion Cool Gift Generation

Detailed inflatable introduction:

Aerated method

1. When adding gas, there must be no Mars or fire around, and ensure safety. Do not smoke while adding gas; 2. Qualified butane gas should be used, and inferior gas may damage the lighter or reduce the service life; 3. When filling the gas for ordinary models, please stand the lighter upside down, align the gas bottle outlet and cover the lighter air inlet, press it several times with force, and keep it for about 2 seconds each time; If the gas cannot be filled, it may be that there is excess air left in the Steam Box. At this time, you can deflate the air and use a small screwdriver to immediately deflate the Air 1-2 times in alignment with air inlet, and then perform the air filling operation; 4. When the Langsheng machine is aerated, loosen the air inlet screw cover with tools such as a slotted screwdriver, and then follow the above steps. After the air filling is finished, the screw cover can be screwed flat, not too tight; Otherwise, the machine cover cover will not be dense and the Machine cover sound will not be crisp, and the gas will escape. Hardcover Langsheng machine should use special air nozzle to add gas; 5. When the gasoline engine is refueling, open the head cover, pull out and reverse the movement, open the outer sponge and add appropriate amount of gasoline. After the gasoline penetrates into the inner layer, cover the outer sponge, and then put it into the casing; 6. After all kinds of lighters replenish fuel, wait at least 1 minute to adjust the temperature of the newly filled gas to room temperature, and wait until the residual gas attached to the lighter is completely volatile before ignition. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may burn, causing unnecessary danger. After re-supplementing the gas, if the flame height is too high or too low during use, it is normal, and the flame height can be adjusted moderately.

To adjust the flame 1. When using, as the gas content of the product decreases and the temperature of the surrounding environment changes, the flame height will change to a certain extent, which is a normal phenomenon. You can adjust the flame height moderately; 2. When using, the normal flame height should be controlled at; Windproof and direct punching lighters are 1.5-2.5cm; Langsheng, gasoline and open flame lighters are 2.5-4.0cm; 3. If you need to adjust the flame height, please use a screwdriver to align the flame regulator groove; If the lighter itself has adjustable ring, you can directly adjust it with your fingers to (-) the direction of the arrow is clockwise, and the flame height can be adjusted to low; The direction of the arrow is counterclockwise, which can increase the flame height. Note: rotate counterclockwise and cannot exceed half a circle based on the normal flame height. Otherwise, this product may be damaged; 4. The gasoline lighter should control the flame height by adjusting the ignition height of lamp wick. If the flame height is too high, scissors can be used to cut a little lamp wick; If the flame height is too low, lamp wick can be pulled out appropriately.

Pay attention to matters 1. Contain pressurized flammable gas, please stay away from children; 2. Do not puncture or throw a lighter, and do not throw it into the fire;

3. Please use it in a ventilated environment and pay attention to flammable items; 4. Fire head is strictly prohibited to face, skin, clothing and other combustible substances to avoid danger; 5. Please check the position of burner when igniting, and press the ignition appropriately. Lighters of different styles are ignited in different ways: they can be divided into straight beating, side beating and side beating; Gasoline engines should quickly rub grinding wheels, and Langsheng machines use thumbs to quickly rub rollers from right to left; 6. When using, if any impurities such as soot accidentally fall into burner, blow it in time to remove the sundries, otherwise it will cause bad fire;

Select a processing method:

1. If there is any shortage, inform you;

2. If there is any shortage, choose the same type to make up;

3. If there is any shortage, make the balance or refund;

4. If there is any shortage, the customer service recommends replenishment.

On sale:

[For the capital turnover of our store, please confirm the receipt in time after receiving the goods, thank you for your cooperation].

1. Honest Shop, rest assured to choose; Yuplatinum lighter Trading Co., Ltd. (reputation shop in lighter industry);

2. About quality problems: the products sold by our company can guarantee the quality, and any quality problems can be returned or exchanged. Please contact us before returning or returning the goods, and we will solve them immediately (For more information, see the lighter return and exchange method);

3. About delivery: lighters are dangerous goods, and express delivery is not allowed in some areas. Please contact us for confirmation before ordering. Our express delivery will be sent to Guotong Express, with a large amount of logistics. The goods are completely carried by a third-party transportation company. The process (express delivery and logistics) is not controlled by our store. The speed and damage during transportation are not controlled by our store. Please check carefully when receiving the goods, thank you!

4. Express delivery and transportation price, time, etc. (self-help inquiry) for more information, please contact customer service! Thank you!

5. Lighter return and exchange processing method (click to view) for more information, please contact customer service! Thank you!

Special reminder:

*** Express and logistics lines are not opened by our store. We only entrust them to transport goods and cannot control the speed and damage during the transportation. Please understand. If the goods are delivered to your city, please do not use the reason that the pick-up location is too far away from you or the freight you think is very high, let us bear your pick-up fee and the transportation cost caused by pick-up!! If you have a designated freight station, please specify it in the form. If you do not specify it, a special line will be sent.

Lighter return processing method

1. Quality Assurance, any quality problem can be returned or exchanged;

2. Very few styles that are not easy to sell can be changed;

3. Our store is responsible for two return shipping fees within one year (starting from half a year);

4. Kerosene lighter cannot be withdrawn.

*** Short-term cooperation does not return the machine

Please read our instructions carefully before shopping. If you have any questions, please contact us in time. We will solve the problem for you immediately, please understand if you fail to reply in time during busy working hours or rest days.