In a word, no bargaining, too many packages! Don't talk about anything else!
Youku video: https://v.youku.com/v_show/id_XMTYyOTkyMjg2OA==.html? spm=a2h1n.8251843.playList.5! 22~5~A&f=51787329&o=1
this model is a spare part, which cannot be blindly dry. The motor must hold up to the bottom before it can be operated. The motor is installed and damaged by yourself! But installation is very simple with a little patience!
If there is a higher requirement for the motor speed, we choose 720 high-speed or 820 high-speed suit, 716 ordinary motor speed and torque may not meet the requirements, 716 no!
Parts Set contains:
1 hollow cup motor, 1 Spindle gear (716 aperture is 0.8mm, 720 and 820 are 1mm), 1 reduction gear, 1 propeller (aperture 1mm, diameter 135mm), 2 metal plugs, 1 plastic plug, 1 gear fixed axis, 1 Motor hair net (tight with motor)
motor Description: (we can also purchase the motor separately and Click 720 and 820)
716 Motor, the shaft is 0.8, the shaft length is 7mm, the speed of 3.7V is 47000 revolutions, the line length is 5cm, the speed is enough, but for a reduction group, the torque is relatively speaking, it still lacks a little heat, no! It's OK to play!
720 motor, the shaft is 1mm, the shaft length is 5mm, the speed of 3.7V is 45000 revolutions, and the line length is 15cm. It is a great motor. It is enough to make four shafts!!!
820 motor, the shaft is 1mm, the shaft length is 5mm, the speed of 3.7V is 45000 revolutions, and the line length is 15cm. It is a very good torque in three motors,!!!!
There is a 2*2 mounting hole under the Motor sleeve, which can be matched with 2*2 carbon fiber rod. Click: Carbon fiber rod
-|-_-|-
